1) Surf bubbling washing machine
Basic Description:
|
Item |
Specification |
|
Application |
Specially used to rinse tomato, strawberry, apple, mango, banana, and other fruit and vegetable that can float. |
|
Process capacity |
1~15tons/hr |
|
Main characters |
1- Unique bubbling surf design makes the materials continue to roll during washing, which not only ensure the material to be thoroughly cleaned but also lower the rate of material damage to a minimum. 2- Made of high-quality stainless steel at whole; imported bearings, double sealed. 3- Controlled by Omron, Schneider and other well-known electrical components. 4- Washing water can be used circularly. |
Technical Parameters:
|
Type |
SSW-1 |
SSW-5 |
SSW-10 |
SSW-15 |
|
Process capacity (ton/Hr) |
1 |
5 |
10 |
15 |
|
Water consumption (ton/Hr) |
0.5 |
1.3 |
1.3 |
1.6 |
|
Power(KW) |
2.2 |
3 |
4.4 |
5.5 |
|
Dimension(L*W*H, mm) |
3000*800*1200 |
4300*1000*2000 |
4600*1400*2000 |
4800*1600*2000 |
2) Brush roller washing machine
Basic Description:
|
Item |
Specification |
|
Application |
Used to rinse peach, apple, pear, citrus, mango, pineapple, watermelon and other hard fruits. |
|
Process capacity |
1~25tons/hr |
|
Main characters |
1- The brush roll is made of stainless steel tube with polyethylene brush. The fruits are conveyed by the two brush rolls’ rotating and are cleaned at the same time. Meanwhile, the unqualified fruits shall be picked up by hand and transported out by the special up or down waste belt conveyor. 2- Unique brush material and design, long using life. 3- Made of high-quality stainless steel structure. |
Technical Parameters:
|
Type |
SRB-5 |
SRB-10 |
SRB-15 |
SRB-20 |
|
Process capacity (ton/Hr) |
5 |
10 |
15 |
25 |
|
Power(KW) |
1.5 |
2.2 |
3 |
4 |
|
Dimension(L*W*H, mm) |
3000*1250*1850 |
3600*1500*1900 |
4000*1600*2000 |
4000*1900*2000 |
3) Rotary drum brush washing machine
Basic Description:
|
Item |
Specification |
|
Application |
Used to rinse carrot, radish, potato, yam, apricot, gingko nut, raisin, herb and other root vegetables. |
|
Process capacity |
1~15ton/Hr |
|
Main characters |
1- The materials enter into rotary drum from the feeding hopper in which they tumble and rub each other with the rotation of the drum. The clean spraying water and bubble waving make dirt and sand on the surface of the materials fall off and discharged from the drum sieve holes together with the drained waste water. There are brushes at intervals in the drum so that the raw materials will get further cleaning under the action of pressure difference and brush friction. Finally, the material after washing will be further cleaned by high-pressure water spraying. 2- Made of high-quality stainless steel. 3- Omron, Schneider and other well-known electrical components. |
Technical Parameters:
|
Type |
SDB-5 |
SDB-5 |
SDB-5 |
SDB-5 |
|
Process capacity (ton/Hr) |
2 |
5 |
10 |
15 |
|
Power(KW) |
3.3 |
3.3 |
5.5 |
6 |
|
Dimension(L*W*H, mm) |
3000*1200*1850 |
4000*1400*2000 |
5000*1600*2500 |
6000*1900*2800 |
